CDQZR - 678000-678999 AQUASIL IMPRESSION MATERIAL

  • MSDS: CDQZR
  • Manufacturer: CAULK DENTSPLY
  • Product Name: 678000-678999 AQUASIL IMPRESSION MATERIAL
  • National Stock Number: 6520-00F053068
Product Identification

Product ID:678000-678999 AQUASIL IMPRESSION MATERIAL
MSDS Date:09/20/1995
FSC:6520
NIIN:00F053068
MSDS Number: CDQZR

Responsible Party
CAULK/DENTSPLY
LAKEVIEW AND CLARKE AVE
MILFORD, DE 19963-0359
US

Emergency Phone: 302-422-4511

Info Phone: 302-422-4511

Cage: 11107

Contractor
CAULK/DENTSPLY
359 MILFORD, DE 19963-0359 US

Telephone: 302-422-4511/ 703-451-1900

Cage: 11107

Ingredients

NON-HAZARDOUS INGREDIENTS

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT MAY IRRITATE EYES & SKIN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, REDDISH RASHES.
Medical Cond Aggravated by Exposure:SKIN RASHES IN SUSCEPTIBLE PERSONS.

First Aid

First Aid:EYES: FLUSH W/COPIOUS AMOUNTS OF WATER FOR 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>415F
Extinguishing Media:SAND, FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR A SCBA & FULL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:DURING A FIRE, IRRITATING &/TOXIC GASES &
AEROSOLS MAY BE PRESENT FROM DECOMPOSITION/COMBUSTION PRODUCTS.

Accidental Release

Spill Release Procedures:COVER W/SAND/SAWDUST/OTHER ABSORBENT MATERIAL.
SCOOP UP & PLACE IN AN APPROPRIATELY MARKED CONTAINER.

Handling

Handling and Storage Precautions:STORE AWAY FROM FOODSTUFFS &
BEVERAGES. STORE AWAY FROM EXTREME HEAT. LATEX/RUBBER GLOVES MAY
INHIBIT SET.

Exposure Controls

Respiratory Protection:NONE REQUIRED DURING NORMAL INTENDED USE OF
PRODUCT.
Ventilation:LOCAL EXHAUST.
Protective Gloves:VINYL GLOVES
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:APRON
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING WITH
CHEMICALS.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>392F
Spec Gravity:1.2
Evaporation Rate & Reference:(BU AC =1): <1
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED PASTE W/FAINT SWEET ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
CONDENSATION SILICONES.
Stability Condition to Avoid:EXTREME HEAT >140F.
Hazardous Decomposition Products:BY FIRE: IRRITATING &/TOXIC GASES &
AEROSOLS.
Conditions to Avoid Polymerization:EXTREME HEAT.

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.